Single Solar Panel 200 Watt

Our 200W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency PERC A-grade cells.

The solar panel glass front is tempered for strength and has low-iron content to give it greater transparency for higher light transmission. The specially textured surface of the solar panel's glass refracts light back towards the solar cell to trap increased light for higher light absorption. This also creates the low reflectivity properties of the solar panel's glass.
The use of PERC technology, which incorporates a passivated emitter and rear cell, reflects light back into the rear of the solar cell to maximise light absorption, increasing overall energy production and efficiency.

A corrosion-resistant anodized aluminium frame encases the solar panel to add strength and allows for easy mounting.

An IP67 junction box, which is attached to the back of the solar panel with a weather-tight seal, has 900mm of double-insulated cable for each positive/negative and MC4 solar panel connectors. The bypass diodes in the junction box provide added protection to the solar panel when connected in series during partial shading.

Specifications for our 200W Mono-PERC solar panels:

Maximum Power (Pmax) - 200W
Maximum Power Voltage (Vmp) - 18.98V
Maximum Power Current (Imp) - 10.78A
Open Circuit Voltage (Voc) - 22.17V
Short Circuit Current (Isc) - 11.28A

Power Tolerance - 3%
Cell Efficiency: 23.30%
Module Efficiency STC - 20.70%
Operating Temperature Range - -40C - +85C
Number of Cells: 32
Cell Type: 166mm x 166mm Mono-PERC
Cell Brand : TW Solar
Dimensions : 1380mm x 700mm x 35mm
Weight: 10kgs

Wind Load: 2400Pascal
Snow Load: 5400Pascal
Warranty: 10 Years

Compliance:IEC61215-1,IEC61215-2, IEC61730-1 and IEC61730-2 as per AS/NZS5033
Application Class: Class A
Fire Rating: Class C